SportsEdge
SportsEdge can supply you with a complete line of high quality products for your track or athletic field projects, and we’ll do it with the best customer service in the business! Whether you are a sports field designer looking for design help or a sports field builder looking for pricing, you will find both our Regional Sales Managers and Inside Sales Reps quick to respond to your phone calls and emails. We look forward to serving you.
Throwing Circles
Aluminum/Stainless Steel Shot Circle
SportsEdge Throwing Circles for discus and shot put/hammer events are all IAAF, NCAA & NFHS regulation compliant. All circles are recessed type. The discus circles create an 8.2’ ring and the shot/hammer circles create a 7.0’ ring. All are made of aluminum and come in four bolt together quarter sections for easy shipment. Both sizes are available in three models; a simple circle, a circle with cross bracing and a cross braced circle with a 10’ x 10’ square form that also creates the pad.Shotput Toeboards are available in mill finish aluminum or white recycled rubber. They come in two heights; 3.5” for recessed pads and 4.0” for level pads. All of them bolt down to an existing concrete pad. SE376D Aluminum Discus CircleSupply Unit: (4) Quarter SectionsMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Hardware included. Stays round during installation. Unit to be blocked up or suspended from pad form for installation.SE377D Aluminum Discus Circle with Cross BracingSupply Unit: (4) Quarter Sections, (8) Reinforcing BarsMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle reinforced with (8) – 1.5” x 1.5” x ¼” aluminum angles connected by ¼” center reinforcing bolt hub. Hardware included. Unit to be blocked up or suspended from pad form for installation.SE378D Aluminum Discus Circle with Full FrameSupply Unit: (4) Quarter Sections, (4) Base Form FramesMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle installs into (4) field assembled base forms to create a complete depressed pad form system (10’ x 10’). No additional formwork required.SE376S Aluminum Shot CircleSupply Unit: (4) Quarter SectionsMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Hardware included. Stays round during installation. Compatible with all toe boards for depressed pad use (SE3641 & SE3641R). Unit to be blocked up or suspended from pad form for installation.SE377S Aluminum Shot Circle with Cross BracingSupply Unit: (4) Quarter Sections W/ (8) Reinforcing BarsSpecification Compliance: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle reinforced with (8) – 1.5” x 1.5” x ¼” aluminum angle connected by ¼” center reinforcing bolt hub. Hardware included. Compatible with all toe boards for depressed pad use (SE3641 & SE3641R). Unit to be blocked up or suspended from pad form for installation.SE378S Aluminum Shot Circle with Full FrameSupply Unit: (4) Quarter Sections W/ (4) Base Form FramesMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle installs into (4) field assembled base forms to create a complete depressed pad form system (10’ x 10’). No additional formwork required. Compatible with all toe boards for depressed pad use (SE3641 & SE3641R).
Throwing Circles
Aluminum/Stainless Steel Shot Circle
SportsEdge Throwing Circles for discus and shot put/hammer events are all IAAF, NCAA & NFHS regulation compliant. All circles are recessed type. The discus circles create an 8.2’ ring and the shot/hammer circles create a 7.0’ ring. All are made of aluminum and come in four bolt together quarter sections for easy shipment. Both sizes are available in three models; a simple circle, a circle with cross bracing and a cross braced circle with a 10’ x 10’ square form that also creates the pad.Shotput Toeboards are available in mill finish aluminum or white recycled rubber. They come in two heights; 3.5” for recessed pads and 4.0” for level pads. All of them bolt down to an existing concrete pad. SE376D Aluminum Discus CircleSupply Unit: (4) Quarter SectionsMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Hardware included. Stays round during installation. Unit to be blocked up or suspended from pad form for installation.SE377D Aluminum Discus Circle with Cross BracingSupply Unit: (4) Quarter Sections, (8) Reinforcing BarsMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle reinforced with (8) – 1.5” x 1.5” x ¼” aluminum angles connected by ¼” center reinforcing bolt hub. Hardware included. Unit to be blocked up or suspended from pad form for installation.SE378D Aluminum Discus Circle with Full FrameSupply Unit: (4) Quarter Sections, (4) Base Form FramesMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle installs into (4) field assembled base forms to create a complete depressed pad form system (10’ x 10’). No additional formwork required.SE376S Aluminum Shot CircleSupply Unit: (4) Quarter SectionsMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Hardware included. Stays round during installation. Compatible with all toe boards for depressed pad use (SE3641 & SE3641R). Unit to be blocked up or suspended from pad form for installation.SE377S Aluminum Shot Circle with Cross BracingSupply Unit: (4) Quarter Sections W/ (8) Reinforcing BarsSpecification Compliance: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle reinforced with (8) – 1.5” x 1.5” x ¼” aluminum angle connected by ¼” center reinforcing bolt hub. Hardware included. Compatible with all toe boards for depressed pad use (SE3641 & SE3641R). Unit to be blocked up or suspended from pad form for installation.SE378S Aluminum Shot Circle with Full FrameSupply Unit: (4) Quarter Sections W/ (4) Base Form FramesMeets Specifications For: IAAF, NCAA, NFHS CompetitionMaterial: Extruded 5052-H32 AluminumDescription: 2” x 3” x ¼” rolled aluminum angle produced in quarter sections field bolted together prior to installation. Circle installs into (4) field assembled base forms to create a complete depressed pad form system (10’ x 10’). No additional formwork required. Compatible with all toe boards for depressed pad use (SE3641 & SE3641R).
- About
Asset Category Filters:
- Select All
- Media
- CAD DWG
- CAD DWF
- CAD DXF
- CAD GIF
- CAD PDF
- Specs DOC
Products in same Family