Cable Connection, The (Ultra-tec Cable Railing)
The Cable Connection was established in 1991. Its principals have been in the wire rope business for over thirty years and are specialists in manufacturing cable assemblies and fittings for up to 3/8 in. diameter cable. Since 1998, Ultra-tec® Cable Railing Infill has been a favorite of architects, specifiers, and builders. With its signature Invisiware® fittings that are concealed inside the end post and sleekly designed outside-the-post fittings, Ultra-tec® Cable Railing Infill provides an attractive alternative to conventional barrier rail systems and can be found in projects throughout North America.
Cable Railing Hardware for Metal Posts — Push-Lock® Threaded Eye
Swagless Non-Tensioning Fittings — Push-Lock® Threaded Eye
The Push-Lock® Threaded Eye is an exposed, swageless, non-tensioning, face-of-the-post-mounted fitting that is suitable for use on level or pitched runs and is available for 1/8” and 3/16” diameter 1x19 stainless steel cable.The Push-Lock® Threaded Eye must be used with a tensioning fitting on the opposite end of the run. This fitting attaches to the end post by installing a Threaded Tab into a pre-drilled and tapped hole in the end post and attaching the Push-Lock® Threaded Eye to the threaded tab with a button head screw. The cable attaches to the fitting via our Push-Lock® locking wedge system which requires no special tools. Screw and threaded tab are sold separately.While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the threaded eye portion of the fitting pivots at the threaded tab.
Cable Railing Hardware for Metal Posts — Push-Lock® Threaded Eye
Swagless Non-Tensioning Fittings — Push-Lock® Threaded Eye
The Push-Lock® Threaded Eye is an exposed, swageless, non-tensioning, face-of-the-post-mounted fitting that is suitable for use on level or pitched runs and is available for 1/8” and 3/16” diameter 1x19 stainless steel cable.The Push-Lock® Threaded Eye must be used with a tensioning fitting on the opposite end of the run. This fitting attaches to the end post by installing a Threaded Tab into a pre-drilled and tapped hole in the end post and attaching the Push-Lock® Threaded Eye to the threaded tab with a button head screw. The cable attaches to the fitting via our Push-Lock® locking wedge system which requires no special tools. Screw and threaded tab are sold separately.While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the threaded eye portion of the fitting pivots at the threaded tab.
- About
- Media
Asset Category Filters:
- Select All
- Media
- CAD PDF
- CAD DWF
- CAD DWG
- CAD GIF
- CAD VWX
- CAD DXF
- Specs Construction Specs
Products in same Family